CLV852

Three-axis vertical machining center

CLV852 - Three-axis vertical machining center

Description and Accessories

The CLV series has been specially designed for the component and mold processing industry. To meet the speed requirements, the 3 axes are equipped with linear guides, which allow an accurate processing speed and a rapid displacement up to 48 m / min.

• The 3 axes are equipped with high precision linear ball guides.
• Pre-load ball screws on 3 axes reduce thermal deformation.
• The STEPLESS motors controlled by Encoder allow perfect positioning accuracy.
• The innovative design of the ATC allows a particularly short tool change (1.31 s at 60 Hz), (from T to T).
• The lubrication system is managed by an automatic control unit that manages the correct dosage of the lubricating oil to avoid over-lubrication and waste.
• The inclined plane design of the frame, together with the cooling system, make chip removal effective.
• The machine is equipped with an integral casing that makes the job cleaner and safer.
• 3 axes, equipped with linear guides with recirculating balls and 4 guides on the X / Y / Z axis, allow rapid response to movement and great dynamic precision.
• The spindle lubrication and cooling system ensure optimal processing.

Standard Accessories

FANUC 31iMB numerical control
15,000 rpm, BT40, Built-in spindle
24-30 seats, BT40 Arm type tool magazine
Controlled spindle temperature with conditioner
Centralized lubrication of the axes
Absolute axis position
Air blower for cleaning the spindle cone
Refrigerant system for workpiece machining
Total accident-prevention protection of the machine
Coolant gun and air gun for cleaning pieces
Coolant tank and liquid cleaning system
Carpet chip conveyor
Work area lighting lamp
Operator three-lamp warning light
Electrical cabinet conditioner
De-oiler for coolant
Remote electronic handwheel
Ethernet interface
Leveling feet
Toolbox for maintenance
Operating manuals and wiring diagram
Machine built in compliance with CE standards

Optional Accessories

Spindle 20,000 rpm, HSKA63, Built-in type
Tool magazine with 60 seats
Coolant through the spindle (25 bar)
Optical lines on three axes
Dredging chip conveyor
Minimal air/oil lubrication system
Oil mist aspiration system
Automatic presetting tool measurement system
Automatic probe piece measurement system
Rotating table (4th axis)

Datasheet

Download Datasheet
UM Value
X-Axis mm 860
Y-Axis mm 520
Z-Axis mm 610
Distance from spindle nose to table surface mm 115-725
Table size mm 1000 x 520
Max load of table kg 500
T-slot (width x pitch x number) mm 18 x 100 x 5
Spindle type Belt type
Max spndle speed rpm 12000
Motor power kW 7,5 / 15
Spindle taper BT40
Rapid traverse (X-Y-Z) m/min 36-36-24
Cutting feedrate mm/min 1-12000
Motor power (X-Y-Z) kW 1.8 / 3.0 / 2.5
ATC Type Arm type
Tool holder capacity nr 24
Max. tool diameter mm 80/150
Max tool lenght mm 300
Max weight of tool kg 7
Tool holders cone BT40
Tang MAS 407
Pneumatic pressure kgf/cm² 6
Electrical power consumption kWA 30
Machine net weight kg 6000
Machine dimensions (LxWxH) mm 4629 x 3743 x 3099

Manuals and media